- 1 What is Windows memory management?
- 2 Causes behind the memory management BSOD error
- 3 Solution One: check and clean RAM modules
- 4 Solution Two: Run the Memory Diagnostic Tool
- 5 Solution Three: Run Check Disk
- 6 Solution Four: Update the graphics driver
- 7 Method One: Update the manual driver
- 8 Method two: use DriverDownloader to update the graphics drivers automatically
The blue screen of death (BSOD) is a common occurrence for Windows users. Almost all regular Windows users see one or two BSOD in their life. T
The BSOD can be a one-time error, which means that you may not see it repeatedly, while a particular BSOD sometimes appears more frequently. You can find more information about a particular BSOD by looking at the stop error code displayed on the screen.
There is no harm in ignoring the occurrences of a single BSOD when the computer recovers after a system reboot followed by a BSOD.
However, if you are viewing a particular BSOD frequently, there is a problem with your system that needs your attention. Many Windows users have complained about BSOD related to memory management. The stopping error code of the BSOD is 0x0000001A.
If you receive this BSOD error and are looking for a solution, this publication is for you.
What is Windows memory management?
Memory management is an important aspect of Windows that keeps the operating system running smoothly. Windows keeps track of the memory allocated to different processes and applications of the system. When any application is closed, the memory is released and then Windows can assign it to any application or process that needs it.
When memory management fails, the system crashes or, in the worst case, a BSOD appears on the screen and the system reboots. . Although the memory management BSOD error may occur when performing multiple tasks, its frequent occurrence indicates some problem that must be resolved
Causes behind the memory management BSOD error
Although the name of the BSOD error refers to to memory management, Problem with memory is not always the cause. Some of the causes behind this error can be
- Disk errors
- Defective RAM
- Software problems like corrupted system files
- Defective drivers
- Hardware problems like graphics card
The correct solution for the BSOD Error Memory Management depends on the root cause. If you know the root cause, you can immediately complete the troubleshooting steps in the related solution and get rid of the error.
If you are not aware of the root cause of the BSOS error like many users, you should test all the solutions. Then until the problem is solved. The best approach is to start with the first solution. If that does not work for you, go to the next solution and so on.
Solution One: check and clean RAM modules
Note: Only desktop users who feel comfortable opening their computer and performing the steps need to go forward. If you are not comfortable with the steps, skip the Solution One and continue with the next one.
Before performing any troubleshooting, clean the RAM modules on your computer. These are the steps you must follow.
- Disconnect the computer from the power source
- Remove all cables connected to the CPU unit
- Open the computer case
- Clean the system board, especially the areas near the computer slots. RAM  Remove the RAM and clean it
- Replace the RAM memory in the slot
- Do this with all RAM memory on the motherboard  Connect all cables to the CPU unit
- Connect the computer to the power supply and start the computer
Run the computer and see if the memory management BSOD error appears. If the error persists, go to the next solution.
Solution Two: Run the Memory Diagnostic Tool
Windows has a built-in memory diagnostic tool that can verify memory-related problems. The memory test is performed at the beginning of the system. Before running the memory diagnostic tool, be sure to save all the work. Here are the steps to follow.
- Click Start and type memory in the search bar
- Select Windows Memory Diagnostic from the list of results
- In the Windows memory diagnostic pop-up window, you can see two options: 1 ) Restart now and check for problems (recommended) and 2) Check for problems the next time I start my computer
- If you select option 1 st the computer will reboot immediately and it will scan the memory before starting. If you select option 2 nd the computer will run the memory diagnostic tool at the next startup.
- You can choose any option. Here we have selected option 1 st that allows you to correct the BSOD memory management error as soon as possible. Be sure to save all work before the computer shuts down.
- Wait for Windows to close normally and restart. The memory diagnostic tool starts automatically when the computer restarts
- wait for the memory diagnostic tool to complete its operation. The diagnostic tool may take several minutes to completely check the memory
- When the memory scan is complete, the computer will automatically reboot. If the memory diagnostic tool reports any errors, you must replace the RAM module.
If the memory diagnostic finds no problem with the memory, you can conclude that RAM is not the cause of the memory management BSOD error. You must go to the next solution to check for errors on the hard drive.
Solution Three: Run Check Disk
You can not ignore the possibility that the NTFS volume is corrupted, which prevents Windows from accessing the files necessary to run the operating system normally. Windows has a built-in tool for reviewing and repairing the disk that is known as Chkdsk. The tool checks the file system and file system metadata of a volume for physical and logical errors.
Chkdsk is a command-line tool, which means that you must open a command prompt window (with administrator rights) to run Chkdsk. These are the steps to follow.
- Click Start and type cmd prompt in the Cortana search box
- Right-click the command prompt in the list of results and select Run as administrator
- In the command prompt window, type chkdsk / f /r.[19659020◆[19459043◆chkdskcommand”
- Press Enter on the keyboard
- When Windows asks about programming chkdsk on the next reboot, type and to get an answer
- Press Enter on the keyboard
- Windows will run the Chkdsk tool in the next The tool will report any errors it finds and fix them
Note: Chkdsk may take longer to complete and you must be patient
- Once Chkdsk completes its operation, the system will restart
. Start in Windows and use your on the computer and see if you find the memory management BSOD error again. If the problem is not solved, move on to the next solution.
Solution Four: Update the graphics driver
As mentioned earlier, the BSOD memory management could be a problem related to the graphics card. To rule out the possibility of a problem with the graphics card driver, install the latest graphics card drivers. There are two ways to update the graphics card drivers: manually through the Device Manager and automatically using the DriverDownloader software. Here we have shown both methods, you can use any method that suits you.
Method One: Update the manual driver
- On your keyboard, press the Windows logo key and R together to start the Run command
- In the Run command window, type devmgmt.msc and click Accept
- In the Device Manager window, go to the Display Adapters and expand it category
- Right click on the Graphic Card in the list and enter your name
- Now open an Internet Navigate and go to the graphic card manufacturer’s website and look for the updated driver for graphics cards installed on your PC
When downloading a driver update, be sure to download the correct driver file. For example, if your computer is running the 32-bit Windows operating system, you must download a 32-bit Windows driver file. In the same way, you must download the correct graphic driver file for the 62-bit Windows operating system.
- Download the correct graphic driver on your computer
- Open the Device Manager window again and go to the Display Adapters category
- Expand the category and right click on the graphics card and click in Uninstall
- . Wait for the uninstallation process to finish
- Close Device Manager
- Now navigate to the drive / folder where you downloaded the driver file
- If the file is in zip format, you need to unzip the contents. After unzipping the contents, double click on the driver configuration file to start the installation
- If the file is in exe format, double click on the file to start the installation
- follow the on-screen instructions to install the latest graphics
- Wait for the process to complete and then restart your computer
If this method does not work for you, try updating the driver automatically
Method two: use DriverDownloader to update the graphics drivers automatically
] To update graphics drivers in a jiffy and without problems?
So, you should consider using DriverDownloader a state-of-the-art driver update software tool that thousands of Windows users trust.
You can update your graphics drivers In less than 2 minutes. All you have to do is download the tool, install it and register.
Only registered users enjoy automatic driver updates, so it is essential that you update DriverDownloader .
Since the application has 30 -Day money back guarantee, there’s no reason why you should not try.
Try it. Definitely worth it. Click on the green button below to download the software.
Solution Five: Run SFC
Windows has a System File Checker (SFC) tool that can solve the problem with system files. The SFC tool replaces the corrupt and missing files with good cached versions that could solve the memory management BSOD problem. You must execute the SFC commands from the command prompt with administrator rights. These are the steps to execute the SFC tool.
- Click on . Menu Start and type cmd in the search box for Cortana
- Right-click on at the command prompt of the list of results and select Run as administrator
- In the command prompt window, type sfc / scannow and press Enter on the keyboard
- Wait for the process to complete
Verify if the BSOD memory management has been generated, if the problem persists, go to the next solution.
Solution Six: Windows update
there is a possibility that the memory management BSOD is due to some major problems in the system to Windows operating. Microsoft offers regular updates to Windows users to correct different errors in Windows. You should always install all recommended Windows updates to make sure that the operating system continues to run smoothly. Here are the steps to install Windows updates.
- On your keyboard, press the key with the Windows logo and me simultaneously to open the Configuration Window
- In the Configuration Window, click Update and Security
- Click Windows Updates and search any slope. updates in the right column
- Click Check for updates. Windows will search for pending updates, download them and install the updates automatically
- After the Windows Update process is complete, restart the computer.
Verify if memory management A BSOD error is generated. If the problem still does not resolve, go to the next solution.
Solution Seven: Check the newly installed hardware and software
You can not rule out the possibility of incompatible hardware or software causing BSOD memory management. Try to remember when the BSOD memory management started to appear. Did you start receiving the error after installing a new hardware or software? If that is the case, you need to remove any new hardware such as a graphics card or any software you have recently installed
To remove the software, follow the steps given
- Open Start Menu
- Click on Settings (icon gear])
- On the Settings menu, click System
- Select the application and features in the left panel
- Select an application you want to uninstall
- ] Click on the Uninstall button that appears next to the application
To remove the hardware, follow the steps indicated.
As mentioned above, troubleshooting steps related to hardware are only applicable to desktop users. Test the solution only if you are sure that you perform the following steps
- Disconnect the computer from the power supply
- Remove all the cables that connect the CPU unit
- Remove the computer case
- Remove the hardware component you want
- Close the computer case
- Reconnect all the cables
- Connect the computer to a power source and start the computer
Still getting the BSOD of memory management? If the answer is Yes, go to the next solution.
Solution Execution virus analysis eight
In rare cases, the memory management BSOD could be due to a virus infection. Make sure that the antivirus software has the latest virus definitions. Update the antivirus and then run a virus scan to get rid of possible infections
the steps to run the virus scan differ with each antivirus software. The steps given here are for reference purposes only. For detailed steps to perform a thorough virus scan, read the antivirus software documentation. Here we have demonstrated the steps for Windows Defender, which is a security software integrated in Windows. Now let’s see the steps
- Open Start Menu
- Click on Settings (gear icon)
- On the Settings menu, click Update and Security
- Click on the Windows Defender option in the left side
- In the following in the dialog box that appears, click Open Windows Defender Security Center.
- Now look on the left side and click the button Virus and Threat Protection
- Click Advanced Scan
- Click on Full Scan
In most cases, the memory error of BSOD management will be solved by one of the solutions. however, if none of the solutions work for you, restart your PC or show your computer to a repair professional.