A Required CD DVD Drive Device Driver Missing Error Fixed

Windows CD and DVD installation media is slowly becoming obsolete. Today, you can see that Microsoft offers the option of USB drive installation media for the installation of the Windows operating system.

Installing Windows OS through the USB drive is one of the easiest things. However, many users have complained about an error that says "a required CD-DVD drive device driver is missing".

The error mentioned above leaves many users confused. Although the error is related to the lack of a driver, many users do not know what should be done about it.


If you are facing a similar problem, you have come to the right place. Here we have analyzed some simple solutions to correct the error "missing a required CD-DVD device driver".

What is the reason behind the error "missing a required CD DVD drive device driver"

The first thing that comes to mind when you see that this error is: why are you receiving this error, especially when you are not using CD / DVD installation media?

The error clearly points to a missing CD / DVD device driver when you are not using any. Well, the answer is: it's just a difference in terminology, but the meaning remains the same.

In simple words, the error is pointing to a missing USB driver and not to a CD / DVD device driver. The error is due to some generic reasons, such as the use of a USB 3.0 memory drive to install Windows 7. As you may know, USB 3.0 is a new technology that was not common when Windows 7 was developed. Therefore, it does not there is native support for USB 3.0 in the Windows 7 installation environment.

In that case, when you use the USB 3.0 Windows 7 installation drive or connect a Windows 7 USB installation media to the USB 3.0 port , is more likely to do so. get the error: a required CD-DVD drive device driver is missing. "However, this might not be the only reason behind this error.

Here we have tried to provide you with effective solutions that could solve" a drive unit device. " CD DVD required "driver missing" error and helps you install Windows 7 correctly using a disk drive.

Solution One: remove the USB drive from the port and plug it back into the same port

First and foremost, the error could be a time problem that is solved by following the instructions given in this solution. To solve the problem, remove the USB drive from the port, plug it back into the same port and restart your computer.


If the error was generated due to an incredible generic problem, you are more likely to see it. It disappears and the installation of Windows 7 works without problems. If you still encounter an error, a required CD-DVD drive device driver is missing. "Go to the next solution.

Solution two: remove the USB drive from the port and plug it back into a different port

There is a possibility that there is an error, it is a problem with a USB port that you used previously and may be the reason Solution One did not work for you, in that case, you need to try another USB port. Continue

  • Unplug Windows 7 USB installation media from port
  • Connect USB installation media to another USB port
  • Restart your computer
  • Verify if the error was generated.

It would be a good option if the new USB port you choose is a USB 2.0 port and not a USB 3.0 port, which is indicated by a blue color, see the reference image below

 USB 3.0 port

If you still have For the required CD-DVD drive device driver, try the following online solution.

Solution 3: Make changes to the USB 3.0 configuration in BIOS

(Note: this solution is only applicable for Windows devices with USB 3.0 ports)

You can not ignore the possibility of that the defective USB configuration causes the error. To rule out this possibility, you must make changes to the USB 3.0 configuration in BIOS. The steps to enter BIOS differ with the BIOS manufacturers. In most cases, you must press a specific key to enter the BIOS setup utility that is displayed on the home screen. Look at the reference image below.


 BIOS Setup Key

After entering the BIOS setup, you must find the USB 3.0 settings. Here we have taken steps to make changes to the USB 3.0 configuration in BIOS. The steps given here are for reference purposes only. The actual steps to change BIOS 3.0 in your case may be completely different.

  • Press the Tab button to select the configuration option

 config

  • In the Config option, look for the USB 3.0 option
  • Use the down arrow key on the keyboard to select USB 3.0

 USB 3.0

  • When and To see the option next to USB 3.0 highlighted, press Enter on the keyboard to see all available options

 USB 3.0 enabled

  • In the list, select Auto or Enabled
  • ] Touch F10 to save the settings
  • Close the BIOS and restart your computer.

In most cases, you will see that a "missing required DVD drive device driver" is missing. If you still receive the error, we recommend that you update the drivers that might be causing the problem.

Solution Four update drivers

The simplest and easiest method to update device drivers is to use a reliable driver update tool.

We recommend that you use DriverDownloader . Click on the green button below to download the software.

Start Download

Update all your drivers in a couple of minutes. You may also be happy to know that this software has a 30-day money back guarantee.

Source drivers .com


Add a Comment

Your email address will not be published. Required fields are marked *