Almost all Windows users need the internet to do one thing or another. That is why the appearance of the error message “ Windows 10 can not connect to this network” when you try to use the network can be extremely frustrating.
Of course, this is not a minor problem, but fortunately there is more than one solution available for it.
In this publication, we & # 39; I have listed several solutions that have worked well in the past for other Windows users. We are also sure that at least one of them will work for you.
1 st Solution: Uninstall the network adapter
This problem may arise when there is a problem with the wireless adapter. You can solve it by uninstalling the network adapter drivers and installing them again.
These are the steps to follow.
- Type & # 39; device manager & # 39; in the start search box, select Device Manager in the results list
- Now look for the network adapter and then right-click
- Click Uninstall
- In case the system asks for it, select the option “Delete the driver software for this device “. Click on the button OK
- Windows will now uninstall the wireless adapter drivers
- Once this is done, restart Windows. When rebooting, Windows will install the new device driver on its own
Now, check if you can connect to the Internet. Otherwise, you may need to update the driver of your network adapter (explained later).
2 nd Solution: update the wireless adapter drivers
If the wireless adapter driver is out of date, then you may also find problem “Windows 10 can not connect to this network “. To resolve the problem, you must update the drivers.
You will need a computer with an Internet connection to manually download the latest driver from the manufacturer’s website. Once you have downloaded the driver file, you can transfer it to your computer using a pendrive. Save the driver file to your desktop and then follow these steps.
- Open the Device Manager
- Find the network adapter, right-click and then click Update driver
- Click Search on my computer the driver software
- Now find the location where you saved the driver file (which is the desktop in this case) and then click on the button Next
- Select the desired driver from the list and follow the on-screen instructions
- Restart Windows for the changes to take effect
As it is Obviously, The process of searching the manufacturer’s site for the most recent driver for your network card is a bit cumbersome. However, more than that, this process is not infallible.
It is always possible for you to download and install an incompatible driver, which in turn can cause serious problems.
Precisely for this reason, we recommend using a professional driver update tool, such as DriverDownloader .
By clicking on the button, this tool can update its network adapter driver and other device drivers.
To download DriverDownloader just click on the green button below.
Download
Once you have installed the software, do not forget to register it. While the tool can be downloaded, installed and run for free, it will update drivers automatically only if you become a registered user. Since the software has a 30-day money back guarantee, you can test it safely.
3 rd Workaround: alter the channel width for the network adapter
You may also receive this error if the channel The network adapter width is not configured correctly. These are the steps you can take to change the channel width.
- Press Win Key + S . Enter network .
- In the list of results, click Network and Sharing Center
- In the Network and Sharing Center Window click Change adapter settings
- Find the network adapter. Right click on it and select Properties
- Click on tab Advanced
- Choose 11 channels wide . Also alter the value. Several users have said they could solve the problem by setting the value to 20 MHz . You can use this or any other value
- Click on the OK button so that the changes can be saved
5 th Solution – Disable IPv6 in Windows 10
- Press Win key + S . Enter network .
- In the list of results, click on Network and Sharing Center
- Click on the current connection and then click on Properties (down) of the window)
- Browse the list until you find Internet Protocol version 6 (TCP / IPv6) . Uncheck the box in front
- Click on the button Accept
- Restart Windows so changes can be made take effect [19659050] 4 th Workaround: Make sure the type of security used by the adapter and the router is the same
Wireless connections use several types of security, such as WPA-PSK or WPA2 -PSK, to guarantee data protection. Your network connection will only work when the type of security used by the computer and the router is the same.
Use the instruction manual that came with the router to configure your security type. Once this is done, check if your computer also uses that type of security.
Follow these steps to do just that.
- Press Win Key + S . Enter network .
- In the list of results, click Network and Sharing Center
- Find the wireless network you are using. Then, right-click and click on Properties
- Click on Security On the Security Type choose the same security type using the router
- Click on the OK button
6 th Solution – Add connection manually
These are the steps to follow.
- Press Win Key + S . Enter network .
- In the list of results, click Network and Sharing Center
- Select Set up a new connection or network
- Click Log in manually to a wireless network
- Click on the Next Button
- Enter the necessary information, such as network name, security type, and security key [19659010] Click the button Next
7 th – Change the wireless network mode
Your network will only work when the network adapter and the router use a mode of identical or similar network. It is possible that you modify the network mode for the adapter and the router.
To change the network mode for the router, you should refer to the instruction manual that is included with it. That said, in most cases, it is not necessary to modify the network mode of the router.
To modify the network mode of the computer, perform these steps.
- Press Win Key + S . Enter network .
- In the list of results, click Network and Sharing Center
- Here click Change adapter settings . Then look for the network adapter and right click on it and select Properties
- Click on Configure
- Click on the tab Advanced . Choose Wireless Mode in Properties Section
- In the Value section, set the wireless mode value as 802.11b . If this does not work, try other values one by one
8 th Solution – Forget the wireless connection
Several Windows 10 users have reported that this solution was very easy for them. You should also try if the problem persists.
These are the steps to follow.
- Press Win Key + I . This will open Settings
- Click Network and Internet
- In the Wi-Fi section, select Manage Wi-Fi settings
- ] Scan down to Manage known networks and select Forget
- Now you need to connect to this same network again
9 th Solution: Disable and then enable wireless connection
Some users were able to fix the problem “Windows 10 can not connect to this network” by disabling the connection and then enabling it immediately.
Complete these steps. [19659009] Press Win Key + S . Enter network .
- In the list of results, click Network and Sharing Center
- Locate the wireless connection and then right-click and select Disable
- Once done this, right click on this wireless connection once more and select Enable
10 th Solution: try the command ipconfig / release
In case of If the problem is still worrying you, run the ipconfig / release command to resolve the problem that is mentioned.
Here are the steps to follow.
- Press Win Key + X and then click Command Prompt (Admin)
- At the command prompt, execute these commands one by one by typing them and pressing the Enter key each time
-
- ipconfig / release
- ipconfig / renew
-
- Exit the command prompt and now try to connect to your network
Yes none of these solutions has worked, you should consider changing the network adapter.